Doses controller for 2 or 3 groups with boiler and water level regulation. Available keypad connection.
Loading cycle of a boiler with time-out and one level probe:
The loading function regulates and controls the correct level of water in the boiler. If the level probe in not covered by water, then the pump and solenoid valveoutputare simultaneously activated. When the probe is reached by water, the pump and solenoidvalve outputare deactivated and remain switched off until the status of the probe changes again. The loading function remains activated for a maximum of 150 seconds (so called time- out). After this period of time the pump and solenoid valve output are deactivated in order to protect the machine from eventual breaks or malfunctioning.
Dispenser management with Flow sensor ingress:
This function allows to analyse entering impulses and therefore communicates with all Flow sensors on the market. It is moreover possible to accurately set the volume of the desired quantity to dispense. In fact once the impulses are memorized by the Flow sensor system, the following doses maintain the same volume.
Time dispenser management:
This function allows to memorize and dispense a time-dose with a accuracy of tenth of a second. Programmation is managed through “self-learning”, therefore the setted dosage is maintained also for the following doses.
Hot water management:
The hot water function allows to have a dedicated set-point temperature and a dedicated output for hot water erogation. By the way this dose is easily settable.
It’s possible to conect maximum 4 keypads each of them can manage a specific output.
easily settable, malfuctioning alarm flow sensor and two segnal leds configurable.